Aqueous release agent is a kind of surface treatment agent which is miscible with water, and is widely used in the release treatment of various moulds, templates and finished products. Compared with the traditional organic solvent-based release agent, aqueous release agent not only has good release performance, but also has the advantages of environmental protection, safety, easy to clean, etc., gradually becoming a necessity in industrial production.
Aqueous release agents can effectively reduce the friction between the finished product and the mould, avoiding the phenomenon of tearing or deformation, and improving production efficiency and quality.
Aqueous release agent can be applied in many fields such as machining, plastic, rubber, frp, aluminium-plastic plate, casting, ceramics, fibre products, etc. It is suitable for various moulds, templates and finished products' release treatment.
| Product Name | Aqueous Release Agent |
| Type | chemical raw material |
| Usage | Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants |
| Brand Name | Kingoda |
| Model Number | 7829 |
| Processing temperature | Natural Room Temperature |
| Stable Temperature | 400℃ |
| Density | 0.725± 0.01 |
| Smell | Hydrocarbon |
| Flash Point | 155~277 ℃ |
| Sample | Free |
| Viscosity | 10cst-10000cst |
Aqueous Release Agent is a new type of mould release treatment agent, with the advantages of environmental protection, safety, easy to clean, etc., gradually replacing the traditional organic solvent-based mould release agent to become the new choice in industrial production. By understanding the function principle and application scope of water-based release agent, as well as mastering the use of skills, you can make better use of water-based release agent to improve production efficiency and quality.
Tips for using Aqueous Release Agent
1. Appropriate amount of spraying: when using water-based release agent, it should be sprayed appropriately according to the actual situation, avoiding too much spraying and wasting resources, or too little spraying and leading to bad results.
2. Spraying evenly: when using Aqueous Release Agent, attention should be paid to spraying evenly, to avoid spraying the centre of gravity is too high or too low, which will affect the effect of the finished product.
3. Timely cleaning: after use, the surface of the mould or finished product should be cleaned in time to avoid the water-based release agent residue and affect the next production.
4. Pay attention to safety: when using Aqueous Release Agent, attention should be paid to safety, to avoid improper use and harm to people and the environment.
25kg/drum, the aqueous release agent should be stored in the environment with the temperature at 5℃~40℃, and the humidity of the environment should be below 60%. Aqueous release agent should be placed in a cool and dry place, avoiding direct sunlight, the storage period of mould release agent is usually one year.